How does the MBSS Linear Hall Effect Sensor break down the magnetic field measurement?

The sensor operates on the principle of the Hall Effect, where a voltage is generated across an electrical conductor when it is placed in a magnetic field. The SS39ET gives a linear response, meaning that the output voltage increases or decreases in direct relation to the magnetic field strength, allowing for precise measurements. This can be particularly valuable in robotics, where accurate sensing of magnetic fields can guide movement or position.

Is the MBSS Linear Hall Effect Sensor compatible with Arduino and Raspberry Pi?

Yes, the MBSS Linear Hall Effect Sensor is fully compatible with both Arduino and Raspberry Pi platforms. The breakout board is equipped with accessible power and ground pins, along with an output pin designed for analog voltage signals that can be easily read by these microcontrollers. This compatibility opens up numerous opportunities for projects ranging from simple educational models to complex robotic systems.

What are some practical projects I can create using the SS39ET sensor?

With the MBSS Linear Hall Effect Sensor, one can embark on various projects, such as creating a magnetic field detector, developing a non-contact current sensor to measure AC current, or even building a magnetically controlled switch. Such applications are not just limited to learning but can also help in developing prototypes for devices requiring magnetic field sensing, such as automated doors or robotic arms.

What is the power requirement for the MBSS Linear Hall Effect Sensor?

The MBSS Linear Hall Effect Sensor operates at a voltage range between 4.5V to 10V. It's crucial to provide the right operating voltage to ensure accurate readings and prevent any damage to the sensor. This makes it suitable for battery-powered devices or projects that need to operate at lower power consumption, such as IoT applications.

Can the output from the MBSS Linear Hall Effect Sensor be used directly for motor control?

While the sensor outputs an analog voltage, direct control of motors typically requires additional circuitry, such as a microcontroller or a motor driver, to interpret the voltage levels appropriately. This enables the voltage output to be translated into actionable commands for motor operation, allowing for sophisticated control based on magnetic field changes.

What type of connector does the MBSS Linear Hall Effect Sensor use?

The breakout board for the MBSS Linear Hall Effect Sensor typically features standard pin headers, making it easy to connect to breadboards or direct wiring on microcontroller boards. These headers are designed to simplify prototyping and help with quick connections, ensuring seamless integration into various electronic projects without soldering.

Does the SS39ET sensor provide digital output?

The SS39ET sensor primarily provides an analog output that corresponds to the detected magnetic field strength. However, if you require digital output for simpler integrations, you can use a comparator circuit to convert the analog signal into a digital signal. This versatility offers flexibility based on the project requirements, allowing hobbyists to use either output type.

What makes the MBSS Linear Hall Effect Sensor different from other sensors?

The MBSS Linear Hall Effect Sensor is distinguished by its ability to provide a continuous range of output voltages, as opposed to just on/off signals found in digital Hall effect sensors. This linearity makes the SS39ET particularly effective for precise applications requiring measurement of variable magnetic fields, offering enhanced accuracy in a wide range of engineering and electronic projects.

Hoe kan ik MBSS Linear Hall Effect Sensor Breakout SS39ET for online winkelen bij Ubuy?

Het is gemakkelijk om MBSS Linear Hall Effect Sensor Breakout SS39ET for online te winkelen bij Ubuy.. U hoeft alleen maar naar het product te zoeken, uw verzendmethode te kiezen tijdens het afrekenen en het op uw locatie te laten bezorgen.

Is MBSS Linear Hall Effect Sensor Breakout SS39ET for beschikbaar om online te winkelen in Netherlands?

Ja, bij Ubuy Netherlands kun je dit product tegen een redelijke prijs kopen.. De MBSS Linear Hall Effect Sensor Breakout SS39ET for is lokaal niet beschikbaar, maar u kunt ons vertrouwen met onze expresverzendingsdiensten.

Hoe lang duurt het om het product te krijgen na het plaatsen van de bestelling?

De levertijd van je bestelde product hangt af van wat je hebt besteld en de verzendmethode die je hebt gekozen.. De geschatte levertijd wordt vermeld tijdens het afrekenen, wees dus zorgeloos tijdens het winkelen.

MBSS Origineel weergeven

MBSS Linear Hall Effect Sensor Breakout SS39ET for Arduino and Raspberry PI

Small and compact linear hall sensor breakout for detecting magnetic fields and intensity.

MBSS

Artikelnr.: 45847254

MBSS Linear Hall Effect Sensor Breakout SS39ET for Arduino and Raspberry PI

Q: What is the MBSS Linear Hall Effect Sensor Breakout SS39ET used for?

The MBSS Linear Hall Effect Sensor Breakout SS39ET is designed to detect magnetic fields and provide linear voltage outputs proportional to the strength of the magnetic field. This sensor is typically utilized in various applications such as proximity sensing, current sensing, and position detection, making it a versatile component for hobby projects and industrial applications alike.

Q: Where can I buy the MBSS Linear Hall Effect Sensor Breakout SS39ET for Arduino and Raspberry Pi in Netherlands?

You can purchase the MBSS Linear Hall Effect Sensor Breakout SS39ET for Arduino and Raspberry Pi from Ubuy in Netherlands. Ubuy provides a convenient platform for finding and ordering this sensor, ensuring you can easily integrate it into your electronic projects.

Artikelnr.: 45847254

€ 21

Prijsdetails

Exclusief verzend- en douanekosten ( Verzend- en douanekosten worden berekend bij het afrekenen )

^{*Alle artikelen worden geïmporteerd vanuit VS}

Beschikbaarheid : Op voorraad

Geïmporteerd uit USA

QTY:

Bestel nu en ontvang het rond Zaterdag, Oktober 10

Beveiligde transactie

Onze beste bezorgdiensten

Small and compact linear hall sensor breakout for detecting magnetic fields and intensity.

U-Care-garantie:

Geen

Selecteer een abonnement

Koop nu, betaal later

Spoedbestelling

Gratis
retourneren^*

Stevig verpakt

100% Origineel product

PCI DSS Compliance

ISO 27001 Certified

Note: Step Down Voltage Transformer required for using electronics products of VS store (110-120). Recommended power converters Nu kopen.

Wat opvalt

High Sensitivity

The MBSS SS39ET boasts exceptional sensitivity, providing accurate readings for magnetic field detection, ideal for robotics and automation projects requiring precision.

Versatile Compatibility

Designed for effortless integration, this sensor is compatible with both Arduino and Raspberry Pi platforms, making it perfect for hobbyists and developers alike.

Compact Design

Its small form factor allows for easy installation and minimal space utilization in various projects, enhancing convenience without compromising performance.

Productdetails

Voor wie is dit geschikt?

Robotics Projects
Ideal for hobbyists integrating magnetic sensing into robots for navigation or object detection.
DIY Electronics
Perfect for enthusiasts creating electronic projects that require precise magnetic field measurements and control.
Educational Purposes
Useful in educational settings for teaching about sensors, magnetism, and programming with Arduino or Raspberry Pi.

High-Precision Applications
May not suit projects requiring extreme accuracy and precision in magnetic field measurements.

PRODUCTBESCHRIJVING

MBSS Linear Hall Effect Sensor Breakout SS39ET for Arduino and Raspberry PI

About This Item

Introducing the MBSS Linear Hall Effect Sensor Breakout SS39ET: Your Perfect DIY Companion Are you a DIY enthusiast looking to add a touch of innovation to your Arduino or Raspberry PI projects? Look no further! The MBSS Linear Hall Effect Sensor Breakout SS39ET is here to unlock your creative potential. With its compact size and simple three-pin setup, this breakout makes detecting magnetic fields a breeze. Whether you want to measure field intensity or distance, this sensor has got you covered. Unlike digital hall sensors, this linear hall sensor provides more complex information about magnetic fields, allowing you to delve deeper into your projects. The versatility of this sensor is unmatched.

Designed for use with Arduino, Raspberry PI, ESP, or other microcontrollers, it offers endless possibilities. From automation in e-commerce to industrial applications, this sensor delivers precise and reliable results. But what sets this sensor apart from the rest? Let's take a closer look at its features and specifications. The MBSS Linear Hall Effect Sensor is engineered for accuracy and precision, ensuring that you receive the most reliable data for your projects.

With a minimum voltage of 2.7V and a maximum voltage of 6.5V, it caters to a wide range of power requirements. One of the standout features of this breakout is its plug and play compatibility. Simply connect it to your microcontroller and read the SIG voltage using an ADC. No need to worry about latching or switching on or off – this linear hall sensor is always ready to go. But it's not just the technical aspects that make this sensor a must-have.

Its affordability and availability make it accessible to all DIY enthusiasts, regardless of budget constraints. And the positive reviews and ratings it has received speak volumes about its quality and performance. Worried about compatibility? Rest assured, this sensor is fully compatible with Arduino and Raspberry PI, making it a seamless addition to your existing projects. And if you're new to the world of hall effect sensors, our comprehensive tutorial will guide you through the setup process step-by-step. So why wait? Enhance your DIY electronics projects with the MBSS Linear Hall Effect Sensor Breakout SS39ET.

Unlock the potential of magnetic field detection and dive into a world of innovation. Order your sensor today and let your creativity soar!.

Heeft u een vraag? Chat met ons

Vragen en antwoorden van klanten

vraag: Hoe kan ik MBSS Linear Hall Effect Sensor Breakout SS39ET for online winkelen bij Ubuy?

antwoord: Het is gemakkelijk om MBSS Linear Hall Effect Sensor Breakout SS39ET for online te winkelen bij Ubuy.. U hoeft alleen maar naar het product te zoeken, uw verzendmethode te kiezen tijdens het afrekenen en het op uw locatie te laten bezorgen.
vraag: Is MBSS Linear Hall Effect Sensor Breakout SS39ET for beschikbaar om online te winkelen in Netherlands?

antwoord: Ja, bij Ubuy Netherlands kun je dit product tegen een redelijke prijs kopen.. De MBSS Linear Hall Effect Sensor Breakout SS39ET for is lokaal niet beschikbaar, maar u kunt ons vertrouwen met onze expresverzendingsdiensten.
vraag: Hoe lang duurt het om het product te krijgen na het plaatsen van de bestelling?

antwoord: De levertijd van je bestelde product hangt af van wat je hebt besteld en de verzendmethode die je hebt gekozen.. De geschatte levertijd wordt vermeld tijdens het afrekenen, wees dus zorgeloos tijdens het winkelen.

MBSS Hall Effect Sensors Editorial Review

Geen beoordelingen van de redactie gevonden

Klantbeoordelingen en -waardering

5.0

1 klantenbeoordelingen

5 ster

100%
4 ster

0%
3 ster

0%
2 ster

0%
1 ster

0%

Beoordeel dit product

Deel uw mening met andere klanten

Voordelen

Highly accurate readings
Compatible with Arduino and Raspberry Pi
Easy to integrate into projects
Compact and lightweight design
Durable and reliable performance

Nadelen

Limited documentation available.

Prijsgeschiedenis van het product

Belangrijke informatie

Beperkingen: voor producten die internationaal worden verzonden, gelieve er rekening mee te houden dat eventuele fabrieksgaranties mogelijk niet geldig zijn; ondersteuningsopties van de fabrikant zijn mogelijk niet beschikbaar; producthandleidingen, instructies en veiligheidswaarschuwingen zijn mogelijk niet in de taal van het land van bestemming; de producten (en bijbehorende materialen) zijn mogelijk niet ontworpen in overeenstemming met de normen, specificaties en etiketteringsvereisten van het land van bestemming; en de producten zijn mogelijk niet in overeenstemming met de voltage- en andere elektriciteitsstandaarden van het land van bestemming (waardoor het gebruik van een adapter of omvormer nodig is, indien van toepassing). De ontvanger is ervoor verantwoordelijk zich ervan te verzekeren dat het product rechtmatig kan worden geïmporteerd naar het land van bestemming. Bij het bestellen bij Ubuy of diens partners geldt de ontvanger als de geregistreerde invoerder en dient zich als zodanig te houden aan alle wetten en voorschriften van het land van bestemming.
Omdat Ubuy een wereldwijde zoekmachine is, zijn niet alle producten die op Ubuy worden vermeld ook te koop. Producten zijn onderworpen aan wetgeving inzake export en handel.

€ 21

Bestel nu en ontvang het rond Zaterdag, Oktober 10

QTY:

Beveiligde transactie

PCI DSS-compliant en ISO 27001:2022-gecertificeerd, met versleutelde betalingen en volledige kopersbescherming bij elke bestelling.

Onze beste bezorgdiensten

Snelste grensoverschrijdende levering

Ubuy-garantie

Ervaar zorgeloos winkelen met 100% originele producten, PCI DSS-conforme betalingsbeveiliging, ISO 27001-gecertificeerde gegevensbescherming, de snelste grensoverschrijdende levering, gratis retourneren *, en veilige verpakking bij elke bestelling.

MBSS Linear Hall Effect Sensor Breakout SS39ET for Arduino and Raspberry PI

€ 21

Koop nu, betaal later

Spoedbestelling

Gratis retourneren*

Stevig verpakt

100% Origineel product

PCI DSS Compliance

ISO 27001 Certified

Wat opvalt

Productdetails

Voor wie is dit geschikt?

PRODUCTBESCHRIJVING

About This Item

Vragen en antwoorden van klanten

MBSS Hall Effect Sensors Editorial Review

Klantbeoordelingen en -waardering

Beoordeel dit product

Voordelen

Nadelen

Prijsgeschiedenis van het product

Belangrijke informatie

€ 21

Ubuy-garantie

Gratis
retourneren^*